voidless-hermetically-sealed surface mount bidirectional transient suppressors www. microsemi . com scottsdale division 1n6103us thru 1n6137aus and 1n6139us thru 1n6173aus 1n6103us ? 1n6137aus 1n6139us description appearance this surface mount series of industry recognized voidless-hermetically- sealed bidirectional transient voltage suppressor (tvs) designs is military qualified to mil-prf-19500/5 16 and are ideal for high-reliability applications where a failure cannot be tolerated. they provide a working peak ?standoff? voltage selection from 5.2 to 152 volts with two package sizes for 500 w and 1500 w ratings. they are very robust in hard-glass construction and also use an internal metallurgical bond identified as category i for high-reliability applications . both of these are also military qualified to mil-prf-19500/516 and are available as both a non suffix part and an ?a? suffix part involving differ ent voltage tolerances as further described in note 4 on page 2. these devices are also available in axial- leaded packages for thru-hole mounting by deleting the ?us? suffix (see separate data sheet for 1n6103 thru 1n 6173a). microsemi also offers numerous other tvs products to meet higher and lower peak pulse power and voltage ratings in both through-hole and surface-mount packages. package ?e? (or ?d-5b?) package ?g? (or ?d-5c?) important: for the most current data, consult microsemi?s website: http://www.microsemi.com ? 1n6173aus features applications / benefits ? high surge current and peak pulse power provides transient voltage protection for sensitive circuits ? triple-layer passivation ? internal ? category i? metallurgical bonds ? voidless hermetically sealed glass package ? jan/tx/txv military qualific ations available per mil-prf- 19500/516 by adding jan, ja ntx, or jantxv prefix (consult factory for 1n6103us and 1n6138us) ? jans available for 1n6103aus thru 1n6118aus per mil-prf-19500/516 as well as further options for screening in accordance with mil-prf-19500 for jans on all others in this series by using a ?msp? prefix, e.g. msp6119aus, msp6143aus, etc. ? axial-leaded equivalents also available (see separate data sheet for 1n6103 thru 1n6173) ? military and other high re liability transient protection ? extremely robust construction ? extensive range in working peak ?standoff? voltage (v wm ) from 5.7 to 152 v ? available as either 500 w or 1500 w peak pulse power (p pp ) using two different size packages ? esd and eft protection per iec6100-4-2 and iec61000-4-4 respectively ? secondary lightning protection per select levels in iec61000-4-5 ? square-end-cap terminals for easy placement ? nonsensitive to esd per mil-std-750 method 1020 ? inherently radiation hard as described in microsemi micronote 050 maximum ratings mechanical and packaging ? operating (t j ) & storage temperature: -55 o c to +175 o c ? peak pulse power (p pp ) at 25 o c: 500 w for 1n6103us to 1n6137aus and 1500 w for 1n6139us to 1n6173aus @ 10/1000 s (also see figures 1,2 and 3) ? impulse repetition rate (duty factor): 0.01% ? steady-state power: 3.0 w for 1n6103us to 1n6137aus and 5.0 w for 1n6139us to 1n6173aus up to t ec = 150 o c. linearly derate above t ec =150 o c to zero at t ec =175 o c. ? steady-state power: 2.0 w for 1n6103us to 1n6137aus and 3.0 w for 1n6139us to 1n6173aus @ t a = 25 o c (see note and figure 4 for linear derating at higher temperatures) ? thermal resistance (junction to endcap): 8.3 o c/w for 1n6103us to 1n6137aus and 5.0 o c/w for 1n6139us to 1n6173aus ? solder temperatures: 260 o c for 10 s (maximum) ? case: hermetically sealed voidless hard glass with tungsten slugs ? terminations: end caps are copper with tin/lead (sn/pb) finish. note previous inventory had solid silver (ag) with tin/lead (sn/pb) finish. ? marking: none ? polarity: no polarity marking for these bidirectional tvss ? tape & reel option: standard per eia-481-b ? weight: 539 mg for 500 watt (e package) 1100 mg for 1500 watt (g package) ? see package dimensions and recommended pad layouts on last page for bot h the ?e? (d-5b) and ?g? (d-5c) size packages note: steady-state power ratings with reference to am bient are for pc boards where thermal resistance from microsemi scottsdale division page 1 mounting point to ambient is sufficiently controlled where t op or t j(max) is not exceeded copyright ? 2008 05-06-2008 rev d 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
voidless-hermetically-sealed surface mount bidirectional transient suppressors www. microsemi . com scottsdale division 1n6103us thru 1n6137aus and 1n6139us thru 1n6173aus 1n6103us ? 1n6137aus 1n6139us electrical characteristics industry type number (note 4) p pp rating minimum breakdown voltage v (br) @ i (br) rated standoff voltage v wm maximum standby current i d @ v wm 500w 1500w maximum clamping voltage v c @ i pp maximum peak pulse current i pp 500 w 1500 w maximum temp. coef. of v (br) 500w 1500w volts ma volts ua ua volts amps amps %/ o c 1n6103aus 1n6139aus 7.13 175 5.7 50 300 11.2 44.6 133.9 .06 1n6104aus 1n6140aus 7.79 150 6.2 20 100 12.1 41.3 124.0 .06 1n6105aus 1n6141aus 8.65 150 6.9 20 100 13.4 37.3 111.9 .06 1n6106aus 1n6142aus 9.50 125 7.6 20 100 14.5 34.5 103.4 .07 1n6107aus 1n6143aus 10.45 125 8.4 20 20 15.6 32.0 96.2 .07 1n6108aus 1n6144aus 11.40 100 9.1 20 20 16.9 29.6 88.8 .07 1n6109aus 1n6145aus 12.35 100 9.9 20 20 18.2 27.5 82.4 .08 1n6110aus 1n6146aus 14.25 75 11.4 20 20 21.0 23.8 71.4 .08 1n6111aus 1n6147aus 15.20 75 12.2 20 20 22.3 22.4 67.3 .08 1n6112aus 1n6148aus 17.10 65 13.7 1 10 25.1 19.9 59.8 .085 1n6113aus 1n6149aus 19.0 65 15.2 1 5 27.7 18.0 54.2 .085 1n6114aus 1n6150aus 20.9 50 16.7 1 5 30.5 16.4 49.2 .085 1n6115aus 1n6151aus 22.8 50 18.2 1 5 33.3 15.0 45.0 .09 1n6116aus 1n6152aus 25.7 50 20.6 1 5 37.4 13.4 40.1 .09 1n6117aus 1n6153aus 28.5 40 22.8 1 5 41.6 12.0 36.0 .09 1n6118aus 1n6154aus 31.4 40 25.1 1 5 45.7 10.9 32.8 .095 1n6119aus 1n6155aus 34.2 30 27.4 1 5 49.9 10.0 30.1 .095 1n6120aus 1n6156aus 37.1 30 29.7 1 5 53.6 9.3 28.0 .095 1n6121aus 1n6157aus 40.9 30 32.7 1 5 59.1 8.5 25.4 .095 1n6122aus 1n6158aus 44.7 25 35.8 1 5 64.6 7.7 23.2 .095 1n6123aus 1n6159aus 48.5 25 38.8 1 5 70.1 7.1 21.4 .095 1n6124aus 1n6160aus 53.2 20 42.6 1 5 77.0 6.5 19.5 .095 1n6125aus 1n6161aus 58.9 20 47.1 1 5 85.3 5.9 17.6 .100 1N6126AUS 1n6162aus 64.6 20 51.7 1 5 97.1 5.1 15.4 .100 1n6127aus 1n6163aus 71.3 20 56.0 1 5 103.1 4.8 14.5 .100 1n6128aus 1n6164aus 77.9 15 62.2 1 5 112.8 4.4 13.3 .100 1n6129aus 1n6165aus 86.5 15 69.2 1 5 125.1 4.0 12.0 .100 1n6130aus 1n6166aus 95.0 12 76.0 1 5 137.6 3.6 10.9 .100 1n6131aus 1n6167aus 104.5 12 86.6 1 5 151.3 3.3 9.9 .100 1n6132aus 1n6168aus 114.0 10 91.2 1 5 165.1 3.0 9.1 .100 1n6133aus 1n6169aus 123.5 10 98.8 1 5 178.8 2.8 8.4 .105 1n6134aus 1n6170aus 142.5 8 114.0 1 5 206.3 2.4 7.3 .105 1n6135aus 1n6171aus 152.0 8 121.6 1 5 218.4 2.3 6.9 .105 1n6136aus 1n6172aus 171.0 5 136.8 1 5 245.7 2.0 6.1 .110 1n6137aus 1n6173aus 190.0 5 152.0 1 5 273.0 1.8 5.5 .110 note: 4 1 1 1 2 3 1 2 3 1 notes: 1. applies to both 500w and 1500w seri es for devices shown (see note 4) 2. applies only to 500w series (1n6103us thru 1n6137us) 3. applies only to 1500w series (1n6139us thru 1n6173aus) 4. part number without the a suffix has 5% higher v c , 5% lower minimum v (br) , and 5% lower i pp . ? 1n6173aus symbols & definitions symbol definition v br minimum breakdown voltage: the minimum volt age the device will exhibit at a specified current. v wm working peak voltage: the maximum peak voltage that can be applied over the operat ing temperature range. this is also referred to as standoff voltage. i d maximum standoff current: the maximum current that wi ll flow at the specified voltage and temperature. v c maximum clamping voltage at specified i pp (peak pulse current) at the specified pulse conditions. p pp peak pulse power: the peak power dissipation resulting from the peak impulse current i pp . microsemi scottsdale division page 2 copyright ? 2008 05-06-2008 rev d 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
voidless-hermetically-sealed surface mount bidirectional transient suppressors www. microsemi . com scottsdale division 1n6103us thru 1n6137aus and 1n6139us thru 1n6173aus 1n6103us ? 1n6137aus 1n6139us graphs microsemi scottsdale division page 3 copyright ? 2008 05-06-2008 rev d ? 1n6173aus pulse time ( tp ) figure 1 peak pulse power vs. pulse time max peak pulse power (p pp ) or current (i pp ) in percent of max ratings peak pulse power (p pp ) 100 1000 10,000 junction temperature (t j ) in o c figure 2 pulse derating curve (prior to impulse) pulse current (i pp ) in percent of i pp time (t) in milliseconds figure 3 pulse wave form 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
voidless-hermetically-sealed surface mount bidirectional transient suppressors www. microsemi . com scottsdale division 1n6103us thru 1n6137aus and 1n6139us thru 1n6173aus 1n6103us ? 1n6137aus 1n6139us maximum steady-state power in watts figure 4 steady-state derating curve for free-air mo unting on pc board package dimensions and pad layouts e-melf-pkg (d-5b) for 1n6103us thru 1n6137aus (500 w) microsemi scottsdale division page 4 copyright ? 2008 05-06-2008 rev d ? 1n6173aus note: if mounting requires adhesive separate from the solder, an additional 0.080 inch diameter contact may be placed in the center between the pads as an optional spot for cement as shown in the pad layout. 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
voidless-hermetically-sealed surface mount bidirectional transient suppressors www. microsemi . com scottsdale division 1n6103us thru 1n6137aus and 1n6139us thru 1n6173aus 1n6103us ? 1n6137aus 1n6139us package dimensions and pad layouts g-melf-pkg (d-5c) for 1n6139us thru 1n6173aus (1500 w) note: if mounting requires adhesive separate from the solder, an additional 0.090 inch diameter contact may be placed in the center between the pads as an optional spot for cement as shown in the pad layout. ? 1n6173aus microsemi scottsdale division page 5 copyright ? 2008 05-06-2008 rev d 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
|
